The concrete pump truck is modified from the chassis of a heavy-duty truck. It is equipped with motion and power transmission devices, pumping and mixing devices, fabric distribution devices, and other auxiliary devices on the chassis.

The end delivery pipe of the pump truck is also known as the concrete pump rubber hose delivery hose. There are many manufacturers of concrete pump rubber hose delivery hoses in China.

When the concrete pump truck is reversing, the situation behind the truck should be observed first, and the reverse target should be selected. After starting in reverse gear, it is important to control the vehicle speed, observe the surrounding conditions, and adjust the direction at any time.

When reversing, you can look at the rear window to reverse, look at the side to reverse, and look at the rearview mirror to reverse. The target selection should align the longitudinal center of the pump truck with the target center, the edge of the pump truck body, or the wheels should be close to the target edge.

Operational requirements

1) When reversing the pump truck, you should first observe the surrounding environment and if necessary, get off the car to observe.

2) When reversing in a straight line, the rear wheels should remain stable, and when making corrections, it is important to drive less and return less.

3) When reversing on a curve, you should first see the situation behind the car and reverse only when you have the conditions to do so.

4) When reversing and turning, while taking into account the overall movement of the vehicle, special attention should also be paid to whether the inner fender of the engine will drive out of obstacles on the road. During the reverse process, the inner front wheel should be as close as possible to the pile position or obstacles, in order to timely correct the direction and avoid obstacles.